How to make glass orbs

Making glass orbs is an art form that requires precision, skill, and patience. With enough practice, however, anyone can learn how to make beautiful glass orbs. Here is a step-by-step guide to get you started.

Step 1: Gather your materials. You will need a furnace, a blowpipe, a pair of tweezers, a marver, a punty, and some glass.

Step 2: Heat up the furnace and get it to the desired temperature.

Step 3: Take a piece of glass and shape it into a cylinder. This can be done by rolling the heated glass on a marver.

Step 4: Take the cylinder of glass and place it onto the end of the blowpipe.

Step 5: Heat the cylinder of glass until it is soft enough to be manipulated.

Step 6: Take the tweezers and pinch the cylinder of glass to form a bubble.

Step 7: Take a punty and place it on the other end of the glass bubble.

Step 8: Blow into the blowpipe as you slowly turn the glass. This will cause the glass to form an orb shape.

Step 9: When the orb is the desired size, use the tweezers to pinch off the excess glass.

Step 10: Place the orb onto the punty and cool it down in the furnace.

Step 11: When the orb has cooled down, remove it from the punty and inspect it for any imperfections.

Step 12: If necessary, reheat the orb and use the tweezers to make any necessary adjustments.

Step 13: When the orb is complete, take it out of the furnace and let it cool down before handling.

Making glass orbs is a challenging but rewarding experience. With patience, practice and the right tools, you can make beautiful glass orbs that will last a lifetime. Good luck!

1. Begin by gathering the necessary tools, such as a glass-blowing torch, a steel bench, a marver (a flat piece of glass-working equipment), a blowpipe, and a couple of graphite tools.

2. Start by heating up the glass-blowing torch and use it to heat the end of a long blowpipe.

3. Place the end of the blowpipe into the molten glass, which should be about 2,000° F.

4. Use the marver to shape the molten glass into a bubble shape.

5. Once the bubble is the desired size, use a graphite tool to cut a hole in the top of the bubble.

6. Reheat the bubble by placing the blowpipe back into the molten glass and use the graphite tool to shape the hole into a uniform circle.

7. Place the bubble onto the steel bench and use a graphite tool to create a neck at the top of the bubble.

8. Reheat the neck of the bubble and use a graphite tool to shape it into a uniform opening.

9. Place the bubble back into the molten glass and use the graphite tool to make the opening larger, until it is the desired size.

10. Once the size of the opening is satisfactory, place the bubble back onto the steel bench and use a graphite tool to shape the opening into a uniform circle.

11. Finally, use a graphite tool to create a small hole at the bottom of the bubble.

12. Carefully place the bubble into a kiln set to 1,500° F, and wait for the glass to cool before removing the finished glass orb.

Making a Water-Filled Glass Conan: Step-by-Step Guide

Making a Water-Filled Glass Conan is a fun and easy way to create a unique glass sculpture. This step-by-step guide will teach you how to make a Water-Filled Glass Conan in just a few simple steps.


– Clear glass container (preferably a large wine or beer glass)

– Water

– Plastic wrap

– Rubber bands

– Glue

– Clay or other modeling material

– Colorful tape


1. Start by filling the glass with water. Make sure to leave enough room at the top so you can add the other materials.

2. Take a piece of plastic wrap and cut it to fit the top of the glass. Secure it with rubber bands.

3. Take the clay or modeling material and form it into a Conan-like figure. Make sure that the figure can fit in the glass and is secure enough to not fall apart.

4. Place the figure into the glass and secure it with glue.

5. Use the colorful tape to decorate the exterior of the glass.

6. Let the figure dry and enjoy your Water-Filled Glass Conan!

This guide provides an excellent overview of the process of making glass orbs. It includes detailed instructions, helpful tips, and safety information. The instructions are clear and easy to follow and the materials are readily available. Overall, this guide is a great resource for anyone interested in learning how to make glass orbs. My recommendation is to follow the instructions carefully and practice safely when working with glass.

1. Start by gathering your glassblowing supplies: a large glass tube, a glass rod, and a burner.

2. Heat up the glass tube with the burner until it is hot and malleable.

3. Gently gather the glass at the end of the tube with the glass rod and form it into a bubble shape.

4. Gently blow into the tube to form the glass bubble.

5. Hold the glass bubble in the flame and spin it to ensure even heating.

6. Once the glass has reached the desired shape and size, remove it from the flame and let it cool.

7. Use the glass rod to cut off the neck of the bubble and create a smooth edge.

8. Finally, polish the glass orb with a polishing cloth to make it shine.