How to engrave glass with a cricut maker

Engraving glass with a Cricut Maker is a great way to create personalized and unique gifts or decorations. The Cricut Maker is a powerful cutting machine that can be used to create intricate designs on a variety of materials, including glass. This guide will provide a step-by-step tutorial on how to engrave glass with a Cricut Maker.

Step 1: Gather Supplies

Before you begin, you will need to gather the following supplies:

• Cricut Maker

• Glass etching cream

• Stencils

• Craft knife

• Cutting mat

• Masking tape

• Cotton swabs

• Glue stick

• Water

• Cloth or paper towels

Step 2: Prepare the Glass

Before you begin engraving, you will need to prepare the glass. Start by cleaning the glass to remove any dirt or debris. Then, use the masking tape to secure the stencil to the glass. Make sure the stencil is firmly attached and there are no gaps.

Step 3: Cut the Stencil

Once the stencil is secure, you can use the Cricut Maker to cut out the design. Set the cutting mat on the machine and place the stencil on top. Select the “Glass” setting from the Cricut Maker’s menu and press the “Cut” button to begin cutting the stencil.

Step 4: Apply the Etching Cream

Once the stencil is cut, it’s time to apply the etching cream. Apply a generous amount of the cream to the exposed glass using a cotton swab. Leave the cream on the glass for 5-10 minutes, or according to the directions on the etching cream.

Step 5: Remove the Stencil

After the etching cream has been on the glass for the recommended amount of time, remove the stencil. Use the craft knife to carefully peel off the stencil from the glass. Be sure to remove any remaining traces of the stencil with the glue stick.

Step 6: Rinse and Dry

Finally, rinse the glass with water to remove the etching cream. Then, dry the glass with a cloth or paper towel. Your glass is now ready to be used or displayed.


Engraving glass with a Cricut Maker is a great way to create personalized and unique gifts or decorations. With this guide and the right supplies, you can easily create intricate designs on glass. Just follow the steps described above and you’ll be engraving glass in no time!

1. Gather all the necessary materials for glass engraving: Cricut Maker, cutting mat, glass etching cream, craft adhesive vinyl, and a squeegee.

2. Clean the glass with soap and water to make sure it is free from dirt and dust.

3. Cut a piece of adhesive vinyl to the size of the glass surface.

4. Place the vinyl on the glass and use the squeegee to press it down firmly.

5. Place the glass on the cutting mat and load the design into Cricut Design Space.

6. Select the engraving tool from the Cricut Maker and adjust the settings for engraving glass.

7. Engrave the design onto the vinyl-covered glass.

8. Once the design is engraved, carefully remove the vinyl from the glass.

9. Apply a thin layer of the glass etching cream onto the engraving.

10. Allow the cream to sit for at least 10 minutes before wiping it away with a damp cloth.

11. Rinse the glass with water and dry it with a soft cloth.

12. Finally, admire your beautiful handiwork!

How to Etch Glass with a Cricut Machine | Step-by-Step Tutorial

Step 1: Gather Your Supplies

You will need the following supplies to etch glass with a Cricut machine:

-Cricut machine

-Glass etching cream

-Cricut adhesive cutting mat

-Stencil vinyl

-Transfer tape

-Glass surface to etch



-Protective gloves

Step 2: Prepare Your Glass Surface

Clean the glass surface thoroughly with a glass cleaner, and make sure it is completely dry before you begin the etching process.

Step 3: Design Your Stencil

Using your Cricut Design Space software, create a design for your stencil. Make sure the design is mirrored so it will be reversed when transferred to the glass.

Step 4: Cut Your Stencil

Place the stencil vinyl onto the Cricut adhesive cutting mat, and load it into your Cricut machine. Select the “vinyl” setting and press the “cut” button to begin cutting your stencil. When the cutting is complete, remove the stencil from the mat and use the scraper to ensure all the tiny pieces of vinyl are removed from the mat.

Step 5: Transfer the Stencil to the Glass

Place the transfer tape over the stencil vinyl, and press it down firmly with the scraper. Carefully lift the transfer tape off the mat, and place it over the glass surface. Rub it down firmly to make sure the stencil is sticking to the glass.

Step 6: Apply the Etching Cream

Put on your protective gloves, and use the ruler to measure and apply the etching cream evenly over the stencil. Let the etching cream sit on the glass for 15 minutes.

Step 7: Remove the Stencil

Carefully remove the stencil from the glass by lifting the transfer tape off. Rinse the glass with water and dry with a clean cloth.

Step 8: Enjoy Your Etched Glass!

Admire your beautiful and unique piece of etched glass.

How to Write On Glass With a Cricut – A Step-by-Step Guide

Using a Cricut to write on glass is a great way to create unique and beautiful decorations for your home. The following step-by-step guide will help you get started.

1. Gather Supplies: To write on glass with a Cricut, you will need a Cricut machine, glass etching cream, a Cricut cutting mat, a Cricut pen, and a glass item to write on.

2. Prepare the Glass: Clean the glass surface with rubbing alcohol or vinegar and a lint-free cloth. Make sure the surface is free of any dirt or dust.

3. Design Your Writing: Using the Cricut Design Space software, create a design that you would like to write on the glass. Make sure to select the “Write” option when selecting the tool type.

4. Load the Pen and Mat: Place the Cricut pen into the machine and load the cutting mat with the glass item. Secure the glass item with a piece of painter’s tape.

5. Write on the Glass: Select the “Go” button in Cricut Design Space and the Cricut will write the design on the glass.

6. Remove the Pen and Mat: Carefully remove the pen and mat from the machine and set the glass aside.

7. Apply the Etching Cream: Put on a pair of gloves and apply the etching cream to the written area of the glass. Let the cream sit for 10-15 minutes, then rinse it off with lukewarm water.

8. Done! Your glass is now ready to be displayed.

How to Emboss Glass with a Cricut – A Step-by-Step Guide

Embossing glass with a Cricut is a great way to add a decorative touch to any glass surface and can be a fun, easy craft project. Here is a step-by-step guide on how to get started:

1. Gather your materials. You will need a Cricut machine, a glass surface, vinyl in whatever color or pattern you want, transfer tape, cutting mat, and scissors.

2. Start by cutting out the vinyl design of your choice. Measure the glass surface and adjust the size of the design accordingly.

3. Once the design is cut, place it on the cutting mat and use the transfer tape to transfer it to the glass surface. Make sure to press down firmly to ensure the vinyl sticks.

4. Once the vinyl is in place, it’s time to emboss. Place the glass in the Cricut and select the embossing option. Follow the instructions on the Cricut to ensure a perfect emboss.

5. Once the embossing is complete, remove the glass from the Cricut and peel off the transfer tape.

6. Finally, use a damp cloth to remove any excess vinyl and let the embossed glass dry.

And that’s it! You’ve now successfully embossed glass with a Cricut.

This guide provided an excellent overview of how to engrave glass with a Cricut Maker. It was easy to follow, and contained all the necessary steps for successful glass engraving. The guide gave clear directions on the appropriate settings and materials to use, and provided helpful tips for achieving the desired results. We recommend this guide to anyone interested in engraving glass with a Cricut Maker, as it is a great starting point for learning the basics.

1. Start by wiping the glass surface with a damp cloth to remove any dust and dirt.

2. Place the glass onto the Cricut mat with the shiny side facing up.

3. Select your design and load it into the Cricut Maker.

4. Make sure to adjust the appropriate settings for engraving on glass.

5. Once the settings have been adjusted, press the button to start the engraving process.

6. When the engraving is complete, carefully remove the glass from the Cricut Maker.

7. To complete the process, use an eraser to gently remove any excess residue from the glass.