How to make a glass gravity bong

Step 1: Gather the materials

You will need:

-A one or two liter plastic bottle
-A glass bowl piece with a stem
-A drill
-A drill bit that is slightly smaller than the stem of the bowl piece
-A scissors
-A lighter

Step 2: Drill a hole in the bottle

Using the drill bit, drill a hole in the side of the plastic bottle about two inches from the bottom. The hole should be slightly smaller than the diameter of the bowl piece stem.

Step 3: Attach the bowl piece

Insert the stem of the bowl piece into the hole that you drilled in the bottle. Make sure it is firmly in place and that the bowl piece is pointing downwards.

Step 4: Cut the bottom of the bottle

Using the scissors, carefully cut the bottom off of the plastic bottle. Make sure to leave enough plastic around the bowl piece to ensure it is firmly attached.

Step 5: Fill the bottle with water

Fill the bottle with water until it is about two inches from the top. Make sure the water is not too high, as it will cause the bong to be too full.

Step 6: Light the bowl piece

Using the lighter, light the bowl piece and inhale the smoke from the bottle. The smoke should be filtered through the water, giving you a smooth and enjoyable experience.

Step 7: Enjoy!

Your gravity bong is now ready to use. Enjoy the smooth hits of your homemade glass gravity bong!
blowing

1. Start by gathering all of your supplies. You will need a glass tube, a glass funnel, a glass bowl, and a rubber stopper.

2. Cut the glass tube to the desired length. Make sure the edges are even and smooth.

3. Heat the glass tube in a flame until it is pliable.

4. Begin to shape the tube into a gravity bong. This can be done by bending and twisting the tube until it forms the desired shape.

5. Once you are satisfied with the shape, let the tube cool down and harden.

6. Make a hole in the tube near the bottom with a drill bit or a glass cutter.

7. Insert the funnel into the tube. Make sure it is a secure fit.

8. Insert the rubber stopper into the tube near the top.

9. Attach the glass bowl to the funnel.

10. Fill the tube with water and place the bowl on top.

11. Light the bowl and inhale the smoke.

12. Enjoy your gravity bong!

DIY Guide: How to Make a Homemade Gravity Bong

A gravity bong is an effective and simple way to get high with minimal effort. The device works by submerging a partially filled bottle of water into a larger container of water, such as a bucket or bathtub. The user then lights the marijuana and slowly pulls the bottle up, creating a vacuum and sucking the smoke from the marijuana into the bottle. Once the bottle is filled with smoke, the user quickly unscrews the cap and inhales the smoke.

Making a homemade gravity bong is relatively simple and requires only a few items.

Materials Needed:

– 2 plastic bottles (one slightly larger than the other)

– Aluminum foil

– Scissors

– Container of water (bucket, bathtub, etc.)

Instructions:

1. Cut off the bottom of the larger bottle and the top of the smaller bottle.

2. Place the smaller bottle inside the larger bottle.

3. Cover the mouth of the smaller bottle with aluminum foil and poke several small holes in it.

4. Place the larger bottle into the container of water.

5. Light the marijuana and slowly pull the bottle up, creating a vacuum and sucking the smoke from the marijuana into the bottle.

6. Once the bottle is filled with smoke, quickly unscrew the cap and inhale the smoke.

7. Enjoy!

How to Make a Gravity Bong with a Glass Bowl

A gravity bong is a device used to smoke weed or other herbal substances. It uses two containers, usually a bucket and a large plastic bottle, and uses the force of gravity to pull the smoke into the bottle.

The first step to making a gravity bong with a glass bowl is to acquire the necessary materials. You will need a large plastic bottle, a bucket, a drill, a drill bit, a glass bowl, and some aluminum foil.

Next, drill a hole in the side of the plastic bottle near the bottom. Make sure the hole is large enough to fit the glass bowl.

Next, take the aluminum foil and shape it into a bowl shape that will fit into the hole you just drilled.

Next, fill the bucket with water until it is about halfway full. Place the bottle in the center of the bucket and make sure the hole is facing up.

Now, put the glass bowl into the hole and secure it with the aluminum foil. Ensure that the bowl is not submerged in the water.

Finally, light your herbal substance and place it in the bowl. As you inhale, the air will be pulled down into the bottle, creating smoke. The smoke will then rise up out of the bottle and into your lungs.

DIY Guide: How to Make a Homemade Glass Bong

A glass bong is a great way to enjoy your favorite herbs or tobacco in a safe and controlled environment. With a little bit of creativity, you can make your own homemade glass bong in no time.

Materials Needed:

-Glass bottle
-Glass cutter
-Grinder
-Glass tube
-Glass bowl
-Pipe screens
-Tape

Instructions:

1. Start by selecting your glass bottle. Choose one with a wide mouth and sturdy base. Make sure the glass is thick enough to handle the pressure of the smoke.

2. Use the glass cutter to make a hole in the side of the bottle. The hole should be slightly bigger than the glass tube you will be using.

3. Use the grinder to make a small hole at the base of the bottle. This is where the bowl will be inserted. Make sure the hole is just large enough for the bowl to fit snugly.

4. Insert the glass tube into the hole you made in the side of the bottle. Make sure it is snug and secure.

5. Place the bowl into the hole at the base of the bottle. Make sure it is secure and won’t move around.

6. Place a few pipe screens into the bowl. This will help keep the ash and debris from entering the bottle.

7. Tape the glass tube to the side of the bottle to make sure it is secure.

8. Fill the bottle with water. Make sure the water is high enough so that the smoke will be filtered as it passes through.

9. Place your herbs into the bowl and light it. Enjoy your homemade glass bong!

Overall, this guide provides an effective and straightforward approach for making a glass gravity bong. It includes clear instructions, helpful visuals, and a list of necessary materials for completing the project. To ensure success, we recommend that you follow the guide carefully and use the highest quality materials available. Additionally, be sure to wear protective gear and work in a well-ventilated area to reduce the risk of injury.
1. Gather the necessary supplies: a large glass bottle, a smaller glass bottle, a drill, a drill bit, and a rubber grommet.

2. Using the drill, carefully create a hole in the side of the large bottle, just above the water line. The size of the hole should be slightly smaller than the rubber grommet.

3. Insert the rubber grommet into the hole and secure it with adhesive.

4. Cut off the bottom of the small bottle and insert it into the large bottle. The small bottle should be partially submerged in the water.

5. Place marijuana in the small bottle and light it. As the smoke builds, slowly pull the small bottle out of the large bottle. The smoke will be drawn down into the water, creating a vacuum and thus a gravity bong.

6. Place your mouth over the opening of the large bottle and inhale. The smoke should be filtered through the water for a smooth hit.